I also tried the host name: dhcppc3 and that didn't work (didn't actually expect it to since the IP didn't work but wanted to be thorough). The printer says it's wirelessly connected correctly with good signal strength and a DHCP IP address that is also in the proper range. I then opened a command window in the OS and pinged the IP address - that failed with 'request timed out' and 'destination host unreachable'. The printer only showed the MAC address, not a name or IP address like the other three so I restarted the routed with the same results. The display showed four wireless devices, one being the printer. I then logged into my router and refreshed all the known connected systems. On the printer, the wireless blue light is solid on and the signal strength displayed on the printer is also showing strong. My computer is connected to the same SSID. I print out the Wireless Network Test Results with the bottom line of "no problems found" for the correct SSID. I have reconfigured the printer twice and during each setup, the printer sees all of the wireless networks (to include mine), I select my network, the printer asks for the passphrase to my network and then it successfully connects to my SSID. I download the 2016 update (PS7510_1315-1.exe) displayed for my printer and it installed but when it came time to connect to the printer, it failed - can't see the printer. I'm writing this from that computer so I'm connected to the Internet and I'm connected wirelessly. I'm running Windows 10 on a a fully loaded Alienware 18. I did not reinstall the printer prior to last night. Plug it back it and wait for the insert cartridges message. Then turn off the machine and unplug it for 5 minutes. However, the one I received was bad out of the box: when printing 8 X 10 pictures on photo paper, every third one was ejected, the printer powered down and powered up, made a noise like a machine gun, and then fed another sheet of paper and then printed the picture. If any of the cartridges are low, empty, leaking or bulging replace them. I immediately upgraded to Windows 10 I'm currently running Windows Anniversary Update (AU). Do this with a small amount of warm water on a cotton swab until no ink comes off on the swab. Business PCs, Workstations and Point of Sale Systemsįirst, the printer worked fine prior to June when a patch crashed Win7 and I had to reinstall the OS.Printer Wireless, Networking & Internet.DesignJet, Large Format Printers & Digital Press.Printing Errors or Lights & Stuck Print Jobs.Notebook Hardware and Upgrade Questions.
0 Comments
Leave a Reply. |